Europlasma Machines

Europlasma, a Belgian manufacturer of plasma treatment machines has several production machines in the market. Also different laboratory setups are available for testing applications directly in the field. The different types will be presented and described together with their possibilities.

Europlasma is building standard and custom designed machines. Under standard machines is understood 4 types of machines with different chamber volumes, thus different production rates. Both a NON-PC and a PC controlled version are available.

Standard this equipment is delivered with a shelve system. But also barrel and roll-to-roll systems can be placed in this equipment.

The second group of machines are custom designed towards the client needs and products. This can vary from very small to very big systems with additional load/unload or other specifications.

For roll-to-roll systems there is a collaboration with a contractant which has several years of experience in the field of vacuum based roll systems.

Small roll-to-roll system

For laboratory purposes or specific applications of low amount and small scaled roll material our standard equipment can be dedicated to such purposes by using a small roll-to-roll cassette. The advantage of this system is the flexibility of the equipment because both shelves and roll system can be placed in the same equipment.

This system is also very useful for laboratory set-up and testing of the plasma treatment for your application.

Typical properties of CD600 type are:

Volume: 216 liter

roll diameter: 20 cm max roll

roll width: 30 cm

speed: 0.1-10 cm/sec

And CD1000 machine:

Volume: 490 liter

roll diameter: 30cm

roll width: 45cm

speed: 0.1-10 cm/sec

These systems can be used were no high demands on tension and production rates are posed.

Large roll-to-roll system (1m width)

More sophisticated batch systems for roll-to-roll treatment of roll material with a dimension of 1 m width, 0.6 m diameter are yet used in production environment in the field of medical filter materials. The speed for these materials is typically 0 to 5m/min. The final speed is dependant on the application and the grade of treatment.

The tension of the material is controlled, which makes it possible to treat sensitive materials.