Properties:

Volume: 1680 liters

Speed: 0-20 m/min

roll width: 1 m

roll diameter: 0.6m

Advantage of this system is that it can be upscaled to higher widths without problem.

The loading/unloading limits the acceptable weight of the rolls.

60" web treater (width 1.5m)

A more easy loading/unloading system to treat rolls with a diameter of 0.5 m.

Advantage of this system is the low to the ground loading/unloading facilities.

Properties of the system:

Speed: 0-20 m/min

roll width: 1.5m

roll diameter: 0.5m

Fiber treatment

The 4th type of machine is dedicated to the treatment of fibres. A continue and semicontinue system is available. Fibres of different kinds can be plasma treated, only by small adaptations to the machine.

The continue system treats fibres from air to air, in line with a speed of 0-40m/min.

The semi-continue machine is a batch process, which means that the roll material is placed in the chamber.

Properties:

Bundle diameter: 5mm

Speed: 0-100 m/min

Experience learns that in line treatment has more disadvantages than advantages because speeds are not necessary equal and some materials deliver strucking problems due to the properties of the material.

In general

Customer design leads to very specific systems, which posed up till now no problems towards the effectivity of the treatment. The dimensions and properties of the textile determine the final mounting system of the roll material. Special feature like pull tension on the material and guiding of the rolls have to be provided.

Capacity problems can be solved by scaling up the machines which increase of course the machine cost.

A very important and useful tool is the PC control installed by EUROPLASMA on its plasma equipment. This PC control increases the efficiency of working and following up of the system.

From full automatic treatments to basic manual operations is possible with this system. The clear and schematic interface improves the understanding and following up of the operation by the operator. By means of recipes different treatments can be programmed and easy being selected. All information of runs, errors and parameters is automatically stored and can be consulted any time by the registered persons.