The design of garments with the "slope angle"
effect, where stripes match on side seams or other divisions, should be made in
a straight silhouette, and its width at the hip line has to be multiple to the
size of the diagonal repeat measured across the intersection of stripes of weft
repeat with the hip line or the bottom line. To satisfy all these conditions
methods have been devised and calculations have been executed.
Thereby, in the issue of researches in process of designing
of constructions of garments made of striped or checked fabrics its basic
stages have been revealed and the algorithm has been developed. This algorithm
allows to find the optimum solution according to a model sketch and to consider
all design stages eliminating defects causing mismatch of stripes in the
construction.
Download
Full Presentation
About the Authors:
The authors
are associated with Moscow State University of Design and Technology. The
presentation is prepared by: Z.E. Bruskina, under the guidance of the Supervisor;
V.A. Masalova
Free Download
