Abstract


Achieving the wash fastness specified by any retailorganisation is not a straightforward exercise in the case of applyingreactive dyestuffs to Cellulosic substrates.


Some of the problems involved are discussed in the fulltext.


Evidence, in the form of a practical working example, ispresented to illustrate the value of understanding the basic principlesinvolved.



Parameter

Before Dyehouse Audit

After Dyehouse Audit

Dyes Used


Procion H-EXL

Same Procion H-EXL

Time of Dyeing Method

275 min

155 min

Time of Wash-Off Process

390 min

124 min

Volume Effluent Produced

20,000 litres

10,000 litres

M&S C4A Test @ 60 C

Fail

Pass

Tensile Strength

Poor

Perfect



Full Article


2.1 Background


The consumer requires the assurance of all clothing and hometextile purchases that they keep their appearance and fastness through domesticlaundry, drying and ironing.


The dyer and finisher require the assurance of all dyes thathe uses that they meet the fastness demands of the customer he is serving.


These fastness assurances are provided by the dyestuff supplierin their published literature.


With the majority of dyestuff classes, the claims of the dyesupplier are relatively easy to achieve in practice.


The exception to the rule occurs in the case of theapplication of reactive dyes to Cellulosic fibres.


Firstly, not all the reactive dye which is applied exhausts onto the fibre.

Some remains in the bath.

Secondly, not all the dye which exhausts onto the fibre ischemically fixed to the fibre.

There is therefore, a significant amount of unfixed dyewhich must be washed off the fibre before the optimum fastness properties ofthe dyed fibre can be realised.


The fastness properties claimed by the reactive dye supplierare obtained under ideal conditions in which all the hydrolysed dye has beenwashed off the fabric.

This will be on small scale dyeings; and it is far easier toachieve a perfect wash-off on this scale than it is in bulk production.


Furthermore, the degree of fixation achieved in bulk productionwill not necessarily match that achieved on smaller scale dyeings.


The degree of fixation achieved in practice can even varyfrom one bulk dyelot to another; even on the same dye recipe on the samesubstrate.


The difficulties in achieving the optimum fastnessproperties are compounded even further when the substrate is varied.


 

A wash-off cycle which is perfectly adequate for a given dye recipe applied to Cotton, for example, may not be quite so efficient when applied to Cotton / Lycra.


Even more uncertainty enters the equation when it is realised that the degree of fixation achieved by a given reactive dye recipe, and on a given substrate, can vary from day to day as the bicarbonate content of the softened Dyehouse water varies.


Let us refer to the dye supplier claims as Theoretical Fastness and the properties achieved in bulk production as Practical Fastness then the complex situation can be summarised as follows.


Light fastness (Theoretical):


* determined by the distribution of electron within the dye molecule, and therefore the molecular structure.


* varies from one dye to another within a given manufacturers range of reactive dyes.


* Usually requires the inclusion of a metal complex with the molecular structure to achieve the highest levels.


Wash Fastness (Practical):


* depends on the reactive dye range chosen.


* can vary from one dye to another within any given range of reactive dyes.


* depends on the efficiency of fixation in the dyeing process.


* depends on the efficiency of the wash-off process.


The Efficiency of the Dyeing Process:


* the design of the dyeing process / alkali system.

* the pH obtained by a given amount of alkali depends on the quality of salt used in exhaustion and the level of bicarbonate impurity in softened Dyehouse water. (see Figs 1 - inc).


* the amount of bicarbonate in softened water can vary from day to day, and even during the day see Table 1.


The Efficiency of the Wash-off process :


* will never equal that of the process used to achieve Theoretical Fastness.


* can vary from machine to machine.


* can vary from one substrate construction to another even on the same machine.



2.2 Alkaline Fixation pH and the influence of bicarbonate impurity in Dyehouse water.


The pH obtained by a given addition of alkali depends on the level of bicarbonate impurity.



 

Fig 1 : Effect of Bicarbonate on the pH of Soda Ash in 0 g/l Salt.



Fig 2 : Effect of Bicarbonate on the pH of Soda Ash in 40 g/l Salt.



 

Fig 3. Effect of Bicarbonate on pH of Soda Ash in 100 g/l Salt.




2.3 Variation of Bicarbonate in Softened Dyehouse water


Table 1. Dyehouse Bicarbonate Variation



  • High Quality Operation in Europe


  • Highest Commission Charges in its Market



Day

Shift 1 (ppm)

Shift 2 (ppm)

Shift 3 (ppm)

Day 1

185

205

345

Day 2

255

200

170

Day 3

190

390

405

Day 4

425

370

390

Day 5

300

290

525

Day 6

390

500

420


  • Wide Variation ( 170 ppm 525 ppm)


  • Unpredictable

 

2.4 Achieving Theory in Practice


This is best summarised and illustrated by a Case Study.

In order to preserve confidentiality the name of our customer is withheld.


Customer Profile


Location:

South East Asia.

Ownership:

100% Japanese financed.

Substrate:

100% Cotton Yarn

Problems:

Consistently failing M&S C4A wash test.


Also failing Tensile strength test.

Particular Problem Shade:

Heavy Scarlet (6% total dye).


The results of the audit by Dyehouse solutions International are shown in Table 2.


Table 2. Revised Processes with same dye selection.


Parameter

Before Dyehouse Audit

After Dyehouse Audit

Dyes Used

Procion H-EXL

Same Procion H-EXL

Time of Dyeing Method

275 min

155 min

Time of Wash-Off Process

390 min

124 min

Volume Effluent Produced

20,000 litres

10,000 litres

M&S C4A Test @ 60 C

Fail

Pass

Tensile Strength

Poor

Perfect


2.5 Concluding Remarks


* Achieving Theoretical Fastness with reactive dyes on cellulose is not straightforward.


* The dye supplier provides the theory.


  • The Dyer and Finisher must understand the principles involved, fully monitor local conditions and pay due diligence in order to achieve Theory in Practice.



To read more articles on Textile, Industry, Technical Textile, Dyes & Chemicals, Machinery, Fashion, Apparel, Technology, Retail, Leather, Footwear & Jewellery,  Software and General please visit https://articles.fibre2fashion.com


To promote your company, product and services via promotional article, follow this link: https://www.fibre2fashion.com/services/article-writing-service/content-promotion-services.asp