
CONTINUOUS DYEING AND FINISHING MACHINE
Prashant Texmach Pvt. Ltd. developed continuous dyeing and
finishing machine for open width nylon, acrylic and polyester tape.11
Machine specification:
It is equipped with disentangling unit with positive feeder
at entry side.
A set of padding mangles (Two rollers having 350 mm width) pre dryer (10 Mts tape content), steaming chamber (40 Mts tape content), five washing device (with
provision of hot water in two tank) and drying and finishing chamber.
COMPARISON BETWEEN CONTINUOUS VS BATCH WISE
PRETREATMENT
|
Sr .No
|
Continuous D-S-B pretreatments
|
Batch wise Pretreatments.
|
|
1
|
Time required is very less
|
Time required is comparably more.
|
|
2
|
Chemicals used are less
|
Chemicals used more
|
|
3
|
Labor charges are low
|
Labor charges are high
|
|
4
|
Efficiency
of Process may be comparable
|
Efficiency of Process is good.
|
Conclusion
In todays era textile companies are increasing there market
share internationally by leaps and bounds. With this every processor is forced
to make maximum utilization of resources available thereby increasing the
pollution load. With stringent government laws for environment protection many
companies should find substitute for conventional preparatory process. In
developing countries like India were electricity, water, and other resources
are limited. Substitute like combined preparatory process would hold key
position to abate pollution problem and saves enormous amount energy.