Interviews
NCTRF develops 3D knitted face coverings
31 Oct '20
3 min read
Pic: Shutterstock
The Navy Clothing and Textile Research Facility (NCTRF) has developed 3D knitted face coverings which are now being evaluated. NCTRF is a business line of the Navy Exchange Service Command (NEXCOM), whose parent command is Naval Supply Systems Command (NAVSUP). The project to produce 3D knitted face coverings was undertaken after direction from NAVSUP.
In March 2020, NAVSUP directed NCTRF to pivot their 3D knitting research from Flight Deck Jerseys to personal protective face coverings to prevent the spread of COVID-19.
“At the onset of COVID-19, when the Honourable James Geurts asked to pull together ideas to respond to COVID-19 and support the defence industrial base, the Navy’s Small Business Innovative Research (SBIR)/Small Business Technology Transfer (STTR) team rose to the challenge,” said Brian Shipley, commercialisation programme manager, Department of the Navy’s SBIR/STTR Programme Office. “This effort was quickly determined to be a way to pivot an existing SBIR Phase II project to support COVID-related efforts to assemble a solution using technology already in development in our SBIR Programme.”
“The utilisation of 3D knitting technology has proven to provide a more streamlined and efficient approach to producing an item,” said Laurra Winters, director of NCTRF. “Our continued work with small businesses and new technologies like 3D knitting will continue to move technology forward and greatly benefit our Navy’s warfighters.”
Using the standards of the N95 mask as a baseline, NCTRF developed the laboratory evaluation protocol for these non-medical face coverings. The yarns used to construct the 3D knitted face coverings are evaluated for comfort and filtration efficiency and the designs are assessed for durability.
A wear test was conducted over the summer and included a broad range of participants within NAVSUP, NEXCOM and Naval Sea Systems Command (NAVSEA). Using data collected during the wear test of the initial prototypes, a second face covering prototype was developed with design and performance improvements. The wear test of the second prototype will occur this fall.
“Assembling a team and collaborating on solving a problem by identifying a technological solution has served as a great example of our ‘Team of Teams’ approach to innovation at NAVSUP,” said Karl Larson, command science advisor and innovation programme manager, NAVSUP.
Seamless 3D knit technology enables rapid prototyping, short lead times and sustainable production of textile products. The evaluation of the second prototype is expected to conclude by the end of 2020, with anticipated commercialisation in 2021.
The Navy Exchange Service Command is one of 11commands under Commander, NAVSUP. NEXCOM oversees six business lines that include Navy Exchange (NEX) stores, Navy Lodges, the Ships Store Programme, the Uniform Programme Management Office, the Navy Clothing and Textile Research Facility and the Telecommunications Programme Office.
In March 2020, NAVSUP directed NCTRF to pivot their 3D knitting research from Flight Deck Jerseys to personal protective face coverings to prevent the spread of COVID-19.
“At the onset of COVID-19, when the Honourable James Geurts asked to pull together ideas to respond to COVID-19 and support the defence industrial base, the Navy’s Small Business Innovative Research (SBIR)/Small Business Technology Transfer (STTR) team rose to the challenge,” said Brian Shipley, commercialisation programme manager, Department of the Navy’s SBIR/STTR Programme Office. “This effort was quickly determined to be a way to pivot an existing SBIR Phase II project to support COVID-related efforts to assemble a solution using technology already in development in our SBIR Programme.”
“The utilisation of 3D knitting technology has proven to provide a more streamlined and efficient approach to producing an item,” said Laurra Winters, director of NCTRF. “Our continued work with small businesses and new technologies like 3D knitting will continue to move technology forward and greatly benefit our Navy’s warfighters.”
Using the standards of the N95 mask as a baseline, NCTRF developed the laboratory evaluation protocol for these non-medical face coverings. The yarns used to construct the 3D knitted face coverings are evaluated for comfort and filtration efficiency and the designs are assessed for durability.
A wear test was conducted over the summer and included a broad range of participants within NAVSUP, NEXCOM and Naval Sea Systems Command (NAVSEA). Using data collected during the wear test of the initial prototypes, a second face covering prototype was developed with design and performance improvements. The wear test of the second prototype will occur this fall.
“Assembling a team and collaborating on solving a problem by identifying a technological solution has served as a great example of our ‘Team of Teams’ approach to innovation at NAVSUP,” said Karl Larson, command science advisor and innovation programme manager, NAVSUP.
Seamless 3D knit technology enables rapid prototyping, short lead times and sustainable production of textile products. The evaluation of the second prototype is expected to conclude by the end of 2020, with anticipated commercialisation in 2021.
The Navy Exchange Service Command is one of 11commands under Commander, NAVSUP. NEXCOM oversees six business lines that include Navy Exchange (NEX) stores, Navy Lodges, the Ships Store Programme, the Uniform Programme Management Office, the Navy Clothing and Textile Research Facility and the Telecommunications Programme Office.
Fibre2Fashion News Desk (SV)
Popular News
Leave your Comments
Esteemed Clients
-Ltd..jpg?tr=w-120,h-60,c-at_max,cm-pad_resize,bg-ffffff "Thermore (Far East) Ltd.")
.jpg?tr=w-120,h-60,c-at_max,cm-pad_resize,bg-ffffff "Telangana State Industrial Infrastructure Corporation Limited (TSllC Ltd)")
.jpg?tr=w-120,h-60,c-at_max,cm-pad_resize,bg-ffffff "Taiwan Textile Federation (TTF)")
