At the ITMA Asia + CITME 2012, Rieter presented the newly developed E 80 combing machine for the first time to the textile world. The E 80 combe fulfills highest demands in terms of productivity, quality and economy with a high measure of flexibility. The actual production performance of the E 80 comber in combination with the fully automated winding system, ROBOlap, amounts to 2 tons daily.
Unique flexibility with combing
The highly flexible E 80 comber is the result of many years of intensive and successful development work in the field of combing technology. The design of the E 80 comber with a 45 % greater combing area enables the focus, freely selected by the customer, to be concentrated on productivity, quality or raw material yield. The customer can choose in line with market requirements and can set the highly flexible comber accordingly.
Selectable focus – quality, productivity or raw material yield
The control of quality, productivity or raw material yield means influencing the production costs in the spinning mill. Rieter’s technology know-how and the machine conception of the E 80 allow this flexible control without additional components. With the same batt weight, a wide spectrum of yarn fineness/counts can be covered.
Highest quality with combing – further improvement of IPI values by 20 %
The Rieter combing technology meets the highest quality demands. With the E 80 comber, a significantly better yarn quality is achieved with the same noil extraction when compared to other systems.
The high yarn quality is achieved with the highest nip rate and the highest possible batt weight. Compared to Rieter’s earlier comber, imperfections (IPI values) are reduced by up to 20 %. The E 80 produces these impressive yarn values at the same high output level as the predecessor model.
The gentle, controlled fiber treatment is assured by the optimally coordinated combing movements C•A•P•DQ (Computer Aided Process Development) and the largest combing area developed by Rieter.
Combing with highest productivity – 2 tons daily
Up to 84 kg/h combed sliver is the actual production performance of the new Rieter E 80 comber with fully automated lap change and ROBOlap piecing system. This corresponds to a production increase of more than 10 % with constant quality compared to the predecessor model. The resulting combed sliver production of up to 2 tons daily is achieved in mill operations with a batt weight of 80 g/m.
The E 80 comber produces up 500 nips in operation. The low energy consumption reduces energy costs and leads to a reduction of production costs at highest productivity.
Apparel/Garments | On 26th May 2016
Prime Minister Narendra Modi expects Parliament to pass the...
Apparel/Garments | On 26th May 2016
Continuing the steady growth witnessed over the past few months,...
Textiles | On 26th May 2016
India’s cotton yarn production grew by 2 per cent to 4,136 million kg ...
What kind of fabric is in demand in export markets of home textiles? What...
At what rate is the luxury products market growing in India? How are...
What is the influence of foreign trends and designs on Indian fashion?
<b><i>Steve Cole of Xerium Technologies discusses the industry. Xerium is...
<b><i>Urs Stalder, CEO, Sanitized AG, talks about the increasing use of...
Larry L Kinn
<b><i>Larry L Kinn, Senior Vice President - Operations Americas of...
Yash P. Kotak
Bombay Hemp Company
One of the directors of Bombay Hemp Company, Yash P. Kotak, speaks to...
Somaiya Kala Vidya
Among the many honours showered on Frater, including Fulbright and Ford...
Gildan Activewear SRL
Gildan Activewear, a manufacturer and marketer of branded clothing and...