Inspection Services
Despite improvement in long distance communication, there is still no substitute
for on the spot supervision of the manufacturing. As we said in the
introduction, if you are a buyer located thousands of miles away from your
product source, you should verify that your interests are being protected and
quality products are being manufactured. Use of an independent inspection
entity, problems will be rectified and prevented at source prior to shipment
and possibly during production. In your absence SCS can monitor the entire
quality assurance operations. SCS has a good reputation for providing
inspection services. Both buyer and seller benefit because SCS provides service
on your behalf at all stages from development through manufacturing process to
pre shipment.
Pre Production Inspection
Before manufacturing begins SCS inspects fabric and trims. This function ensures
appearance of the components is constant and satisfactory to the requirements
and specifications.
Online Production Inspection
 During
the early stage of production, SCS randomly inspects the first production batch
for the possible defect. If any should occur, we identify the variation and
provide advice on corrective measures that are necessary to ensure an uniform
batch quality and a quality product.
Mid Production Inspection
After online production inspection, SCS performs a MID inspection when around
considerable quantity is packed. This inspection is done to assure that what
ever instructions and corrective measures given at online inspection are
followed and implemented or not. Again to reassure that quality standards are
being maintained and each garment is packed with quality.
Final Random Inspection
 SCS
conducts Final Random Inspection when goods are packed and ready for shipment.
Inspection is based on universally acceptable statistical sampling procedure.
This procedure is different from client to client. However SCS follows MIL STD
1 05E standards inspection level II 2.5 if there is no indication from the
client. After the impartial and objective inspection a factual report is
submitted to the buyer/client with the evaluation based on following criteria
Inspection Criteria
Inspection usually entails visual and manual examination for criteria such as:
-
Design
-
Dimensions
-
Appearance
-
Function
-
Labeling / Marking and packaging
-
Assembly
-
Style / Colors / Assortment
-
Workmanship
-
Material
|
