Fiber Opening Machine, Multh-Layer Cotton Mixing Machine, Double-Mandrel Loosening Machine
 
About Us Products Contact Us Trade Leads
 
 
Products
 
Next
FIBRE OPENING MACHINE

Purpose & Characteristic To loosen all kinds of fiber in bundles, wind-driven machine transferring material into next production procedures, with good quality and loosening efficiency.
Main Style:

Structural style
Ⅰ:Pre-stitch adopts notch style pulling to reduce fracture of fiber
Ⅱ :Refined cotton opening adopts high-intensity big metallic needle mandrel, with good loosening effect of fabrics
Main spec
Machine width: 1000mm、1300mm
Output: 30-150kg/h、30-250kg/h

General power: 7kw、9.2kw
     
NEEDLE CORD STYLE BAG-OPENING MACHINE

Purpose & Characteristic To loosen an equalize the supply of cotton in certain length, Blend different fiber in proportion by double use in many sets, with wide Scope of automatic control, different fiber in accurate proportion and mixture.
Main Style:

Main spec
Machine width: 1120mm、1420mm

Output: 15-120kg/h 15-150kg/h
General power: 3.35kw、3.75kw
     
MULTH-LAYER COTTON MIXING MACHINE

Purpose & Characteristic Applicable to the mixture in proportion of fiber different quality, controlled jointly by photo electricity, with dense air current to mix the different fiber in full evenness.
Main Style:

Main spec
Layer number: 4、6
Machine width: 1400mm

Output: 500kg/h、600kg/h
General power: 10.2kw、10.85kw

     
BAROMETRIC PRESSURE COTTON FEEDING MADHINE

Purpose & Characteristic To loosen and mix the fiber loosened already, process it into Even cotton for next procedures. Feeding in volume, cotton stored by barometric pressure, to adjust structure by evening cotton transversely in mechanical style, with accurate and even cotton Supply.
Main Style:

Main spec
Machine width: 1380mm-2380mm

Production output: 30-200kg/h
General power: 3.75kw-4.8kw
     
VIBRATING COTTON FEEDING MADHINE

Purpose & Characteristic To loosen and mix the fiber loosened already, process it into even cotton for next procedures. Feeding in ration by volume style, controlled by photo current, with convenient adjustment, accurate and even cotton supply
Main Style:

Main spec
Machine width: 1380mm-2380mm

Production output: 30-200kg/h
General power: 3.75kw-4.8kw
     
DOUBLE-MANDREL LOOSENING MACHINE

Purpose & Characteristic To reclaim and employ the rim charge and material loosened of non-woven fabrics.
Main Style:

Main spec
Machine width: 1000mm

Output: 30-85kg/h
General power: 4.75kw
     
SINGLE-CYLINDER SINGLE-DOFF COMBING MACHINE

Purpose & Characteristic 1.5-20d×38-65mm Applicable to the artificial fiber combing.
Main Style:

Main spec
Machine width: 1520、1820、2000、2200、2520mm
Cylinder: 850mm×1、1020mm×1、1230mm×1


Doffer: 535mm×1、492mm×1
Mesh outputting speed: 20-55m/min

Cotton striping: stripper bar or roller
Power: 10.5kw
     
SINGLE-CYLINDER DOUBLE-DOFF COMBING MACHINE

Purpose & Characteristic To loosen and mix the fiber loosened already, process it into even cotton for next procedures. Feeding in ration by volume style, controlled by photo current, with convenient adjustment, accurate and even cotton supply
Main Style:

Machine width: 1520、1820、2000、2200、2520mm
Cylinder: φ850mm、1020mm、1230mm
Doffer: 535mm、492mm
Mesh outputting speed: 20-45m/min
Cotton striping: stripper bar or roller

Power: 11.25-15.5kw
     
DOUBLE-CYLINDER DOUBLE-DOFF COMBING MACHINE

Purpose & Characteristic Applicable to the mesh combing of polyester fiber, propane fiber, adhesive glue, fiber, artificial fiber specified at 1.5-20d×38-65mm.
Main Style:

Main spec
Machine width: 2000mm、2200mm、2500mm
Small Cylinder: φ850mm×1

Big Cylinder: φ1230mm×1
Doffer: 635mm×1、492mm×2
Mesh outputting speed: 20-55m/min
Cotton stripping: roller

General Power: 25.2kw
     
FEEDING APPARATUS

Purpose & Characteristic Feeding by mesh guide ring in finger style High intensity, anti-abrasion, static electricity proofed PVC non joint adhesive tape Applicable to the high gram products 400-1200g/m2
Main Style:

Main spec
Machine width: 2200-8800mm
     
CROSS LAPPER

Purpose & Characteristic To fold pave the fiber after combing evenly into certain width and thickness, to be transferred to then next procedures after pressurization. Different speed compensation is adjusted among mesh cord, with stretch reduction of fiber mesh, frequency-converting speed change for transmission and reciprocation of three cords, anti-sway installation, with convenient up and down adjustment of output cord . To fold and pave the fiber mesh evenly into certain width and thickness up to technical requirements, to next procedures after
Main Style:

Main spec
Mesh-paving width: 1700mm、2000mm、2200mm、2400mm、2700mm
Mesh forming width: 2500-8600mm

Mesh paving speed: ≤60m/min
General power: 6-13.5kw
     
MIDDLE SPEED NEEDLE PUNCHING MACHINE

Purpose & Characteristic Applicable to the production of general non-woven fabrics such as stitching cotton, shoe material, hand woven fabrich etc.
Main Style:

Main spec
Structural form: pre-stitch upper stitch upper stitch down stitch
Machine width: 2200-8600mm
Stitching density: 4000-6000s/m
Stitching frequency: 100-600n/min
Stitching course: 40-65mm

Fabric moving speed: 0.6-6m/min
General power: 9-48kw
     
HIGH SPEED NEEDLE PUNCHING MACHINE

Purpose & Characteristic Applicable to the production of stitching, non-woven fabric of high density, high pulling force quality. He machine adopts crankshaft balance oil tank, automatic circulation and lubrication. With up and down integrity, compact and unique structure, convenient adjustment, high frequency as well as its efficiency.
Main Style:

Main spec
Effective machine width: 2200-8600mm
Stitching density: 3500-6000s/m

Stitching frequency: 800-1200n/min
Stitching course: 30-40mm
Fabric moving speed: 0.6-6m/min

General power: 15-48kw
     
BUTT-STITCHING NEEDLE PUNCHING MACHINE

Purpose & Characteristic Applicable to the production of stitching, non-woven fabric of high density, high pulling force quality. He machine adopts crankshaft balance oil tank, automatic circulation and lubrication. With up and down integrity, compact and unique structure, convenient adjustment, high frequency as well as its efficiency.
Main Style:

Main spec
Effective machine width: 2600-8600mm
Stitching density: 3500-7500s/m×2
Stitching frequency: 700-1200n/min
Stitching course: 30-60mm

Fabric moving speed: 0.6-6m/min
General power: 30-72kw
     
DOUBLE SHAFT STITCHING MACHINE

Purpose & Characteristic Applicable to the production of stitching, non-woven fabric of high density, high pulling force quality. He machine adopts crankshaft balance oil tank, automatic circulation and lubrication. With up and down integrity, compact and unique structure, convenient adjustment, high frequency as well as its efficiency.
Main Style:

Main spec
Effective machine width: 2200-4600mm
Stitching density: 3500-6000s/m×2
Stitching frequency: 1200n/min
Stitching course: 30-40mm

Fabric moving speed: 0.6-6m/min
General power: 28-52kw
     
IRONING MACHINE

Purpose & Characteristic Applicable to the surface heat treatment of non-woven fabric products, and can reach the surface effect and thickness.
Main Style:

Main spec
Structural style: two mandrels and three mandrels
Machine width: 1800-4800mm
Speed scope: 1.5-10m/min
Surface temperature: ≤230℃

Heating method: electricity or boiler
     
HOT ROLLING MADHINE

Purpose & Characteristic Applicable to the surface heat treatment of non woven fabrics such as polyester fiber, propane fiber, propane fiber, polyamine fiber ES fiber by hot rolling, including lining cloth, garments, sanitary material, wrapper, the basic cloth of the decorative floor leather, the liner of shoes and artificial leather substrate.
Main Style:

Main spec
Structural style: two mandrels and three mandrels
Machine width: 1400-4500mm
Speed scope: 0.5-8m/min 15-45m/min

Surface temperature: ≤250℃
Heating method: electricity or hot oil circul
Next