MonfortsFong's Textile Machinery Company Ltd is a joint venture between Fong'sIndustries Company Ltd, Hong Kong and A. Monforts Textilmaschinen GmbH &Co. KG. Till date, more than 3000 Monfongs machines are in use in textilefactories around the world-an indication of the precise manufacturingtechniques and German technology that Monforts Fong's offers. The Monfongs 6500is the flagship stenter of Monforts Fong's as it provides end users with energysavings, flexibility, and high productivity.

WithA.T.E. providing sales and service, the Monfongs 6500 stenter has become one ofthe most widely used stenters in the Indian textile industry-it is economicalto operate, can be used in the finishing of both woven and knitted fabrics, andhas several energy saving features. By adding on some optional accessories, itis possible to enhance the performance of the Monfongs 6500 stenter evenfurther.

Eco-booster heat recovery system

TheEco-booster heat recovery system for the Monfongs 6500 stenter is an advancedheat recovery module with an automated cleaning system. The Eco-booster helpsusers save heat energy during the drying, finishing, and heat setting processesin the stenter. The new and improved version of the Eco-booster has alsoeliminated oil dripping on fabric to a significant extent.

Disc-O-Clean

Duringthe operation of the stenter, it is a common practice to manually clean thefluff (collected inside the chamber filters) regularly to ensure the freecirculation of air inside the chambers. If this cleaning is not donefrequently, the filter gets choked with fluff, impeding the circulation of airand hampering the evaporation of moisture, thereby lowering productivity.

TheDisc-o-clean is a fully automatic and continuous lint cleaning system that canbe fitted in the hot air chamber filter. It continuously cleans the tworotating screens, while the stenter is in operation, ensuring uninterrupted andoptimal performance of the stenter. This optional accessory is recommended forthe first 4 chambers of the stenter, where the accumulation of fluff is high inthe filtering system.

CADstreamE

Inwider width stenters, running of narrow width fabric results in adisproportionately high energy consumption as all the nozzle outlets across theentire width are open. CADStreamE allows users to manually control and adjustthe outlets of the nozzles to adjust to the narrow width fabric. This preventsthe wastage of energy. Depending on the width of the fabrics being run on thestenter, the nozzles that need to be closed can be chosen beforehand by thecustomer.

TheCADStreamE is an optional accessory that is suitable for use with machinewidths of 260 cm or more and is particularly useful for manufacturers whomanufacture textiles of varying working widths.

Matex Eco-Applicator

The Matex Eco-Applicator is a minimal liquor application device with liquor rollers. This soft coating solution is an alternate applicator to the finishing padder. The Eco-Applicator is designed to save energy as well as liquor for a wide range of textile finishes using the liquor application methods given below:

  • Application of liquor to one sideof the fabric

  • Application of liquor to bothsides of the fabric

  • Application of different liquorsto either side of the fabric, or

  • Application of two different liquors consecutively to a single side of the fabric.


Monformatic

The Monformatic is a controlling system for continuous drying, fixing or condensation processes. This process control system offers automatic production speed control or control of circulation fan speed in order to meet the preset dwell time of heat-setting or finishing, ensuring cost-effective operation of the 6500 stenter.

Integrated washing system

The integrated washing system for the Monfongs 6500 stenter cleans the spun oil in cotton or Lycra-knitted fabrics before the fabric is passed through the stenter for heat setting. With the integrated washing system, a separate spun oil washing range is not needed-the entire process of spun oil washing, drying, and heat setting is done in one line.