Vandewiele to present carpet weaving machines at ITMA 2019
May 06, 2019 - Belgium
Vandewiele is set to present a wide range of technologies, including the latest RCE2+digital carpet weaving machine at ITMA 2019 expo, in hall 4, at stand A206. The leading textile and garment technology exhibition will be held from June 20-26, 2019, in Barcelona. Vandewiele develops textile systems for flooring qualities, home linen, and fashion fabrics.
The company’s sensors, software programmes and servers have become increasingly sophisticated as part of the TEXconnect programme, and the real-time data from different machines – across connected manufacturing sites and across different countries and even continents – can be collected and shared. Digital models of both machines and production processes can be created and analysed for the optimisation of production settings, to vastly improve scheduling and planning and also make considerable savings in raw materials and energy consumption.
Virtual and remote control now allows for the Big Data analysis that is propelling the industry forward and will pave the way for AI applications. For carpet manufacturers, all of this is leading to the creation of truly Smart Factories, the company said in a press release.
The new RCE2+ Rug and Carpet Expert weaving machine is a truly digital workhorse, with all yarns continuously controlled and measured and the difficult bobbin changes of the past completely eliminated. This is as a result of Vandewiele’s latest Fast Creel, with the feed and tension of each pile yarn controlled by individual servomotors.
The pile yarns are now fed directly into the machine without having to pass pile-stop motions, to both increase efficiency and eliminate any waste yarns, while achieving previously unreachable industrial speeds. TEXconnect further provides readily-available data on all yarn consumption, tension and threading, and then will supply the predictive maintenance that is paving the way to self-learning carpet weaving machines.
The company will also display the INCA (interlacing by non-continuous air) system for BCF extrusion systems – a new method for intermingling BCF yarns which greatly improves tangle knot uniformity for significant cost savings.
The new VSi32 Velvet Smart Innovator jacquard, in combination with the latest Smart Creel, for the production of Italian velvet – combining the potential of flat woven jacquard fabrics with pile yarns leading to the potential for the creation of whole new range of fabrics for the home and for fashion, will also be a part of the show. Vandewiele will present the latest Superba MCD/3 space-dyeing machine, which is capable of handling a layer of 72 ends with an unequalled range of spot length, especially for ultra-short spots of below 25mm.
The Vandewiele Cobble Colortec L+, which is now the most versatile tufting machine available on the market, will be present at ITMA 2019, along with a range of jacquards from Vandewiele Bonas, demonstrated across ITMA 2019 above flat weaving machines from the industry leaders, as well as Vandewiele’s own RCE2+.
The company will display the completely revised Titan 5540 carpet finishing machine from Vandewiele Titan, which is now able to accommodate carpets with straight, round and complexly-shaped corners simultaneously, along with the Vandewiele Arraycam 5420 optical inspection system which is suitable for monitoring standard fabrics on all common tricot warp knitting machines and the latest IRO-ROJ weft insertion technologies. (GK)