Dilo to show staple fibre nonwoven production line at ITMA

23 Sep '15

4 min read

All drives for the aprons and the layering carriages are direct water-cooled torque motors to improve the acceleration with reduced gear wear.

After the crosslapper, Dilo will show a new needleloom type DI-LOOM OD-II AB with CBF feeding system.

When designing this model series, Dilo has laid special emphasis on cost effectiveness in the preneedling machine and the DI-LOOM AB has a very favourable price-performance ratio.

Dilo will also show a compact line which is designed for the production of small amounts of high quality felts used in the medical sector and for specialty felts made from fibres such as carbon.

The needleloom of the compact line is the first to use needle modules and has been so designed for the intense needling of the Hyperpunch and Cyclopunch in order to allow an economic needle insertion of these boards with more than 20,000 needles per metre per board.

The compact needle loom shows the module technology in a classical fishbone arrangement, each module comprising 22 needles.

Dilo further added that the new Variopunch technology is based on a modified needle module technology which can erase bad spots in the felt by a variable needle arrangement in order to achieve a better evenness of the stitching pattern.

The basics of the completely new needling technology VPX200 will be presented with the aid of graphic simulations.

“Variopunch allows a very homogeneous distribution of stitches for better surface quality in automotive applications,” it stated. (AR)

Fibre2Fashion News Desk – India

More ITMA 2015 News... More Textiles News - Germany...