Fong's to display innovative dyeing solutions at ITMA

18 May '19

3 min read

Pic: Fong's

Fong’s Europe will show latest textile machinery at ITMA 2019, in hall 2, stand D101 and at Xorella’s stand D203, in hall 6. The leading textile and garment technology exhibition will be held from June 20-26, 2019, in Barcelona, Spain. Fong’s specialises in manufacturing of dyeing and finishing equipment for yarn dyeing, piece dyeing, dryers, and finishing.

The company will show the THEN SMARTFLOW TSF, which is designed to achieve the lowest possible energy and water consumption rates available on the market for jet dyeing, with achievable liquor ratios for a full load up to 300kg with a reduced kier volume and a liquor ratio down to 1:3.5 for cotton and 1:2.5 for synthetics, the company said in a press release.

Fong’s ALC automatic liquid chemical weighting and dispensing system will also be presented at ITMA. It realises unmanned dispensing according to the instructions fed from the Enterprise Resource Planning (ERP) system using advanced computer control technology. By means of precision mass flow-meter and metering pump, the liquid chemicals are accurately and precisely delivered and weighed from storage tanks, and with the application of valves and pipe network connections, the chemicals are accurately and rapidly distributed to the designated dyeing machine in the most effective way.

The company will display the Tecwin high temperature dyeing machine. The machine, with its premium quality and focus on ‘lower cost, higher quality and more eco-friendly’, injects infinite vitality to the textile industry. Fong’s Tecwin is designed to satisfy the ever-changing market demands. The reliability and versatility of the machine are improved.

Goller will show a compartment of its Knit Merc mercerising machine. Goller new knit mercerising was developed to achieve highest quality mercerising of knit fabrics with lowest tension and upmost best dimension stability (< 3 per cent) over the fabric width for perfect dyeing results.

The cutting-edge fabric processing applicator – Matex Eco-Applicator by Monforts will also be displayed at ITMA 2019. The conventional process of drying the fabric with wet pick up in Stenter process will cause large heat energy consumption, particularly it needs to heat up and evaporate water from the fabric. The eco-applicator will be different from the tradition way but to be the solution to save the energy from this part of processing.

Monforts will be showing a wide range of advanced innovations and developments at ITMA, including exhaust air cleaning and heat recovery with automatic cleaning for its thermos-treatment machines. Monforts Texcoat coating machine is for multi-functional coating purpose, which integrates knife coating, magnetic roller coating and rotary screen printing. The multi-functional coating could be adapted to a wide range of applications for different fabrics and finishing demands.

Monforts will show the new internet platform (Webshop) for easily identifying and ordering wear and spare parts with user-friendly visualisation (specific to the respective machine). The company will also release the New Monforts app for direct communication of the customer to the Monforts service organisation with new, advanced tools and functions to be used with smartphones.

At ITMA 2019, Xorella will release the latest generation of Xorella Control Unit, with hardware and software as well as visualisation, which have been redesigned with a clear concept in mind. It offers easy operation even by less experienced staff in the mills. (GK)

Fibre2Fashion News Desk – India

More Textiles News - Germany...