Interviews
News Flash
Karl Mayer's DS Opto-EC offers both direct & sectional warping
21 Jul '16
2 min read
The DS Opto-EC from Karl Mayer is a warp preparation machine, which combines sectional warping in weaving preparation with direct warping in warp knitting preparation on the basis of a universal hybrid principle.
“The result of this combination is maximum flexibility and economic viability when producing warp beams for warp knitting,” the German textile machinery producer said.
The DS Opto-EC processes non-stretch filament yarns to produce warp beams having a wide band width.
While conventional sectional warp beams with long running lengths, having a width of 21” and a diameter of 30" can be produced efficiently by the direct warping process.
“If short warps are needed for product development, or if small runs have to be worked, the DS Opto-EC offers easy handling and low costs in the sectional warping mode,” the company added.
Furthermore, the warp-for-warp technique enables processing tests to be carried out on expensive yarns economically and can also be used efficiently for producing high-quality sectional warp beams.
The DS Opto-EC also offers advantages for cone warping when producing patterned sectional warp beam by placing yarn sections of different colours next to each other accurately and operating at high speeds. (AR)
“The result of this combination is maximum flexibility and economic viability when producing warp beams for warp knitting,” the German textile machinery producer said.
The DS Opto-EC processes non-stretch filament yarns to produce warp beams having a wide band width.
While conventional sectional warp beams with long running lengths, having a width of 21” and a diameter of 30" can be produced efficiently by the direct warping process.
“If short warps are needed for product development, or if small runs have to be worked, the DS Opto-EC offers easy handling and low costs in the sectional warping mode,” the company added.
Furthermore, the warp-for-warp technique enables processing tests to be carried out on expensive yarns economically and can also be used efficiently for producing high-quality sectional warp beams.
The DS Opto-EC also offers advantages for cone warping when producing patterned sectional warp beam by placing yarn sections of different colours next to each other accurately and operating at high speeds. (AR)
Fibre2fashion News Desk - India
Popular News
Leave your Comments
Editor’s Pick
Esteemed Clients
-Ltd..jpg?tr=w-120,h-60,c-at_max,cm-pad_resize,bg-ffffff "Thermore (Far East) Ltd.")
.jpg?tr=w-120,h-60,c-at_max,cm-pad_resize,bg-ffffff "Telangana State Industrial Infrastructure Corporation Limited (TSllC Ltd)")
.jpg?tr=w-120,h-60,c-at_max,cm-pad_resize,bg-ffffff "Taiwan Textile Federation (TTF)")
