Interviews
News Flash
Oerlikon to show Sytec One solution at Domotex 2018
11 Jan '18
2 min read
Oerlikon Neumag, an Oerlikon Manmade Fibers segment brand, which is the leader for manmade fibre filament spinning systems, texturing machines, BCF systems, staple fibre systems, and artificial turf systems, is set to present the Sytec One solution for demanding BCF processes at Domotex 2018, to be held from January 12 to 15, 2018, in Hannover, Germany.
Cost-efficient production of carpet yarns beyond commodity products can constitute a challenge. Highly standardised production systems must strike compromises with regard to throughput, quality or cost-efficiency. The Sytec One is a BCF plant with only one end per position. Due to this single-end characteristic, it is particularly well-suited for demanding production processes, such as recycled polyester or fine filaments. In the event of a yarn break, only one end breaks. All the other positions are not affected and continue to run. As a result, this plant has a higher efficiency compared with a multi-end technology plant. For example, with ten breaks a day, the efficiency of the Sytec One is still over 98 per cent, while a three-end technology achieves only 92 per cent efficiency.
The machine concept of the Sytec One with its absolutely straight yarn path in spinning and texturing also enables significantly higher process speeds compared to multi-end technologies. This results in a speed increase of up to 15 per cent.
Martin Rademacher, vice president of sales Oerlikon Neumag said, “In addition to standard processes, more demanding processes with higher break rates play an increasingly important role. The product mix is critical to the choice of technology. We are in the comfortable position of being able to offer our customers both a single-end and a three-end technology.” (GK)
Cost-efficient production of carpet yarns beyond commodity products can constitute a challenge. Highly standardised production systems must strike compromises with regard to throughput, quality or cost-efficiency. The Sytec One is a BCF plant with only one end per position. Due to this single-end characteristic, it is particularly well-suited for demanding production processes, such as recycled polyester or fine filaments. In the event of a yarn break, only one end breaks. All the other positions are not affected and continue to run. As a result, this plant has a higher efficiency compared with a multi-end technology plant. For example, with ten breaks a day, the efficiency of the Sytec One is still over 98 per cent, while a three-end technology achieves only 92 per cent efficiency.
The machine concept of the Sytec One with its absolutely straight yarn path in spinning and texturing also enables significantly higher process speeds compared to multi-end technologies. This results in a speed increase of up to 15 per cent.
Martin Rademacher, vice president of sales Oerlikon Neumag said, “In addition to standard processes, more demanding processes with higher break rates play an increasingly important role. The product mix is critical to the choice of technology. We are in the comfortable position of being able to offer our customers both a single-end and a three-end technology.” (GK)
Fibre2Fashion News Desk – India
Popular News
Leave your Comments
Editor’s Pick
Esteemed Clients
-Ltd..jpg?tr=w-120,h-60,c-at_max,cm-pad_resize,bg-ffffff "Thermore (Far East) Ltd.")
.jpg?tr=w-120,h-60,c-at_max,cm-pad_resize,bg-ffffff "Telangana State Industrial Infrastructure Corporation Limited (TSllC Ltd)")
.jpg?tr=w-120,h-60,c-at_max,cm-pad_resize,bg-ffffff "Taiwan Textile Federation (TTF)")
