Rotorcraft, an innovator in spinning technology, will introduce New Generation Drafting (NGD) at ITMA Asia beginning October 15 in Shanghai. Combined into NGD, the Switzerland-based company provides a simple and effective solution for drafting that is second to none. NGD consists of the RT3 top arm and the mechanical compacting system Green Compact RoCoS.
The well-known mechanical compacting system Green Compact RoCoS combines superior yarn quality with remarkable power savings (as compared to first generation, pneumatic systems). It is easy to install and simple to operate.
"The top arm RT3 solves a problem prevalent in every mill: conventional top arms use setting screws for changing the distance between rollers. Manually adjusting the settings of the top arm in this way invariably leads to different distances along each ring frame. This in turn leads to uneven yarn quality. By contrast, the RT3 eliminates set screws, and therefore human error. The distance between rollers is changed by easily interchangeable, differently colored roller holders instead of set screws. In this concept, each differently coloured roller holder represents a different distance. This not only solves the problem of wrong manual distances, but also makes it easy to check the setting of each top arm by checking on the colours," Rotorcraft said in a press release. (RR)
Fibre2Fashion News Desk – India
Disclaimer - All News/Articles items are subject to copyright and no article either in full or part may be reproduced in any form without permission from Fibre2Fashion Pvt. Ltd.
