Introduction
The production of nonwoven fabrics is carried out either asa continuous process, with fiber or resin as the input material and a roll offabric as output, or as a series of batch processes. Nonwoven bonded fabricsare, by definition, textiles and they can be finished in exactly the same wayas other textiles such as woven or knitted fabrics. There are many examples ofparticular methods and types of processing equipment being used for both kindsof fabrics.
Washing
Before any coloration, fabric is treated to have the bestpossible absorbency, for the purpose of washing is to remove unwantedsubstances from the fabric. In a wet process a suitable washing machine, usingwater as the washing medium and occasionally a detergent, intensifies the effectsrequired.
While some anionic washing agents also have the effect ofsoftening the fabric, nonionic agents have the advantage of being universallycompatible but are more efficient only at specific temperatures. In all wet anddry processes, the fabric should be subjected to as little tension as possible.
Dyeing
Nonwoven fabrics are colored either plain or patterned whenthey are to be used for decorative purposes. Examples are in wallpapers orfloor coverings, table or bed linen or as furnishing fabrics. The interliningsfor shirts or blouses are also colored to match the top fabric. Colors can bedivided into dyes and pigments. Dyes have substantivity for fibers, meaningthey are attracted from their application media by the fibrous substrate. Pigmentsare applied from a latex medium. Both dyes and pigments can be applied atvarious stages of the nonwoven process, starting from the polymer or pulp offibers prior to web formation.
(d) Subsequent dyeing:
It is much more difficult to dye and bond simultaneously if the web is composed of a mixture of different kinds of fibers. In this case and also in many cases when the fiber is homogeneous, dyeing is carried out in a later stage. The nonwoven fabric is then treated as a woven or knitted fabric and is dyed in the traditional ways.
Heavy and high bulk fabrics are dyed continuously since jiggers or dyeing beams, which work in batches, can cope with only small quantities and is therefore not economically feasible. It is however possible to dye light nonwoven fabrics perfectly on dyeing beams.
(e) Cold pad batch dyeing:
This process was patented by Farbwerke Hoechst for the dyeing of bonded webs made from polyamide by the cold pad-batch method. Nonwoven fabrics meant for curtains and table linen produced by the melt spinning or card/cross-laying method and bonded with acrylic acid esters are dyed with acid or metal complex dyes to which acids are added to provide hydrogen bonding together with cold wetting agents to encourage migration. The fabric is then padded, batched and left for 24 hours covered with polyethylene film to be roller burnished. Later it is given a warm rinse followed by soaping and, thereafter, a further rinse.
(f) Continuous dyeing:
The dyeing of heavy nonwoven fabrics is continuous, usually by the conventional pad-steam process followed by steaming to fix the dye. Steaming is usually followed by rinsing and washing.
Printing
Due to the increasingly popular use of nonwovens in the home furnishing sector there has been a great expansion of the color range and printing methods. The most commonly employed methods are screen and rotary screen-printing. The nonwoven fabric is placed on the printing backcloth similar to any other fabric and printed with dyestuffs appropriate for the fabric concerned, partially dried, fixed by steaming and washed.
Pigment printing is very important since the pigment binders
bond the fabric even more. The effect is particularly marked in spun-bonded
fabrics. A further consequence is that condensation replaces drying and
steaming. If the thickeners have little body, washing may not be necessary.
(a) Printing of light non-woven bonded fabrics:
Pigments are suitable for all kinds of light, non-woven bonded fabrics. The concentration of dye is high in light fabric printing.
(b) Printing of heavy non-woven bonded fabrics:
The printing paste for the rotary screen-printing of heavy needled fabrics have very different rheological properties from the paste suitable for light fabrics. The printing speed is much lower than when printing light fabrics.
(c) Transfer printing:
In transfer printing, subliming dyestuffs are transferred from a release paper on to the nonwoven bonded fabric with the aid of heat and pressure. Polyester fiber is most suitable for this method.
Nonwovens industry has grown exponentially in the recent past and processing technology for nonwovens has definitely come a long way. Looking forward, growth of nonwovens is expected to come from increased penetration of existing applications in developing market as well as new application areas in developed regions. With still a lot of scope left to implement better and improved processing technology and ongoing researches across the globe at world class institutes, nonwovens industry will continue to see a booming time in future.
About the Author:
Ms. Priyadarshini Malshe is a Masters student in North Carolina State University, USA.
Comments