Home / Knowledge / News / Textiles / Swiss E 80 combing machine presented at ITMA show
Swiss E 80 combing machine presented at ITMA show
12
Jun '12

At the ITMA Asia + CITME 2012, Rieter presented the newly developed E 80 combing machine for the first time to the textile world. The E 80 combe fulfills highest demands in terms of productivity, quality and economy with a high measure of flexibility. The actual production performance of the E 80 comber in combination with the fully automated winding system, ROBOlap, amounts to 2 tons daily.

Unique flexibility with combing

The highly flexible E 80 comber is the result of many years of intensive and successful development work in the field of combing technology. The design of the E 80 comber with a 45 % greater combing area enables the focus, freely selected by the customer, to be concentrated on productivity, quality or raw material yield. The customer can choose in line with market requirements and can set the highly flexible comber accordingly.

Selectable focus – quality, productivity or raw material yield

The control of quality, productivity or raw material yield means influencing the production costs in the spinning mill. Rieter’s technology know-how and the machine conception of the E 80 allow this flexible control without additional components. With the same batt weight, a wide spectrum of yarn fineness/counts can be covered.

Highest quality with combing – further improvement of IPI values by 20 %

The Rieter combing technology meets the highest quality demands. With the E 80 comber, a significantly better yarn quality is achieved with the same noil extraction when compared to other systems.

The high yarn quality is achieved with the highest nip rate and the highest possible batt weight. Compared to Rieter’s earlier comber, imperfections (IPI values) are reduced by up to 20 %. The E 80 produces these impressive yarn values at the same high output level as the predecessor model.

The gentle, controlled fiber treatment is assured by the optimally coordinated combing movements C•A•P•DQ (Computer Aided Process Development) and the largest combing area developed by Rieter.

Combing with highest productivity – 2 tons daily

Up to 84 kg/h combed sliver is the actual production performance of the new Rieter E 80 comber with fully automated lap change and ROBOlap piecing system. This corresponds to a production increase of more than 10 % with constant quality compared to the predecessor model. The resulting combed sliver production of up to 2 tons daily is achieved in mill operations with a batt weight of 80 g/m.

The E 80 comber produces up 500 nips in operation. The low energy consumption reduces energy costs and leads to a reduction of production costs at highest productivity.

Must ReadView All

Textiles | On 29th Apr 2017

Textile sector may have uniform GST rate: Irani

The textile sector could have a uniform Goods and Services Tax (GST)...

Textiles | On 29th Apr 2017

EU rules needed to curb textile worker exploitation: MEPs

European Union (EU) rules are needed to oblige textile and clothing...

Apparel/Garments | On 29th Apr 2017

US retail operating growth to be 1.5-2.5% in 2017: Moody's

The forecast for operating income growth in the US over the next 12...

Interviews View All

Neel Sawhney
One Friday

‘The share of kidswear segment in the online sector is still small in...

Karan Toshniwal
Orange O Tec

Contemporary industry is paying more and more attention to the...

Karan Suratwala
Key Textile Accessories Private Limited

Chinese imports are destroying the supply chain

Ashok Desai
Bombay Textile Research Association

Bombay Textile Research Association (BTRA) is a leading name in textile...

Marcel Alberts
Eurofibers

Coating at a fibre level is a practice not usually seen in the...

Kerem Durdag
Biovation II LLC

Kerem Durdag, CEO, Biovation II LLC, provides an insight into future...

Ritu Kumar
Label Ritu Kumar

‘Classics will return’ "There are a lot of people wearing western clothes ...

Igor Chapurin
Chapurin

"Now we can see the Russian trend in international fashion. And Russian...

Tony Ward
Tony Ward

"You have to truly understand what your client wants, know her needs, what ...

Press Release

Press Release

Letter to Editor

Letter to Editor

RSS Feed

RSS Feed

Submit your press release on


editorial@fibre2fashion.com

Letter To Editor






(Max. 8000 char.)

Search Companies





SEARCH

news category


Related Categories:
April 2017

April 2017

Subscribe today and get the latest update on Textiles, Fashion, Apparel and so on.

SUBSCRIBE


Browse Our Archives

GO


E-News Insight
Subscribe Today and Get the
Latest News Update in Your Mail Box.
Advanced Search



X