At ITMA 2019, Rieter, supplier of systems for short-staple fibre spinning, is displaying innovations for all four spinning processes that are established on the market, in hall 6, booth C 201. In addition, Rieter presents two solutions for the production of innovative yarns. The leading textile and garment expo is being held from June 20-26, 2019, in Spain.
These innovations are designed to reduce raw material, energy, and labour costs, while also increasing productivity during production of the yarn quality required in each case. Solutions to increase the flexibility of the spinning mill are also presented at ITMA, Rieter said in a press release.At ITMA 2019, Rieter, supplier of systems for short-staple fibre spinning, is displaying innovations for all four spinning processes that are established on the market, in hall 6, booth C 201. In addition, Rieter presents two solutions for the production of innovative yarns. The leading textile and garment expo is being held from June 20-26, 2019, in Spain.#
In fibre preparation, the blowroom VARIOline with the new UNIClean B 15 brings significant improvements in terms of energy consumption and the cleaning result for all spinning processes. The same applies to the new high-performance card C 80, which offers an unrivalled level of productivity.
To increase the cost effectiveness of the ring spinning and compact spinning process, Rieter reveals the new comber E 90, the new roving frame F 40, the piecing robot ROBOspin and three different compacting units that can easily be installed on and removed from a ring spinning machine: COMPACTdrum, COMPACTapron, and COMPACTeasy.
Innovations that bring considerable improvements in efficiency for the rotor spinning process are also presented. The draw frame module RSB-Module 50 can be used in combination with the high-performance card C 80 and can be configured to a highly efficient direct process with the new semi-automated R 37 or the fully automated R 70. The new, cost-effective rotor spinning machines are characterised by low energy consumption, high productivity and high machine availability with low raw material costs. There are innovations for the air-jet spinning process too. The process for producing a very attractive yarn made of 100 per cent combed cotton is presented at the expo.
The new innovations for the four spinning processes are supplemented by two new functionalities of ESSENTIAL: ESSENTIALorder and ESSENTIALconsult, which are available to all Rieter customers free of charge with the purchase of a new machine. In addition to the existing modules ESSENTIALmonitor, ESSENTIALmaintain and ESSENTIALpredict, the next steps are demonstrated: ESSENTIALlab for integrating laboratory data into the spinning mill management system, ESSENTIALoptimize, the intelligent recipe management system, and ESSENTIALautomate for integrating the transport and logistics systems.
The growing digital service offering complements new solutions for optimising the installed base. With the PSM drafting motor, Rieter After Sales offers a significant improvement on the machines G 33 and K 44; and with the energy saving support disc, it offers the possibility to make considerable energy savings on rotor spinning machines.
Rieter’s component manufacturers are also introducing further innovations for day-to-day operations, such as the Bräcker ring traveler C1 ELM udr and the new SOLIDRING B 188 from Suessen. In preciforce, SSM presents a system for optimising the bobbin build-up on precision winding machines. SSM also reveals another yarn innovation: fancyflex is a technology for manufacturing slub yarn for textured yarns. (GK)
Fibre2Fashion News Desk – India
20240830145952.gif)
20240925092649.png)
.jpg?tr=w-120,h-60,c-at_max,cm-pad_resize,bg-ffffff "UBM China (Shanghai)")
-Ltd..jpg?tr=w-120,h-60,c-at_max,cm-pad_resize,bg-ffffff "Thermore (Far East) Ltd.")
