Home / Knowledge / News / Textiles / Uster experts to explain Tester 6 at DTG 2018
Uster experts to explain Tester 6 at DTG 2018
11
Jan '18
Uster experts to explain Tester 6 at DTG 2018
Uster Technologies, a high-technology instrument manufacturer of products for quality measurement and certification of the textile industries, has announced that Uster experts will provide information on the Uster Tester 6 machine at the 15th Dhaka International Textile and Garment Machinery (DTG) expo, in Bangladesh, from February 8 to 11, 2018, in hall 6, booth 606.

Uster Tester 6 is more than the ultimate evenness tester: it is also the gateway to wider potential benefits for mills, integrating data from other Uster quality measurement sources to create a real total testing centre. Bangladesh mills have been quick to recognise these extended advantages, and several Uster Tester 6 units are already in operation in Bangladesh, as well as in the rest of South East Asia.

The sheer speed of the Uster Tester 6 – without compromise on quality – is hailed by all the spinners. The test speed of 800 m/min also provides highly reliable and extremely accurate results, thanks to the new capacitive and optical sensors.

Spinning mills also report increased efficiency in quality management, with feature such as the graphical presentation of ‘timeline’ reports – analysing the product with a long-term perspective and providing quality data over a pre-defined time.

In fact, the Uster Tester can provide essential data for any parameter describing yarn appearance – taking in well over a hundred different factors – using its in-built yarn testing functions, as well as through connections with other Uster testing and monitoring systems.

This totally-integrated facility leverages the value of the information and provides practical insights into the entire yarn production sequence and downstream processes. This enormous mass of data requires built-in intelligence to transform it into quick and easy-to-follow guidance for the spinner. Quality alerts provide an early warning of potential issues, allowing spinners to identify and remedy any faults likely to cause second-quality material. Objective guidance helps spinners to categorise quality levels, using the so-called ‘yarn grades’, while critical questions about a yarn’s performance in subsequent processes are answered by intelligent predictions of fabric appearance, pilling resistance and overall ‘weavability’. (GK)

Fibre2Fashion News Desk – India


Must ReadView All

ITC, ICS tie up to help Moroccan textile value chain

Textiles | On 21st Apr 2018

ITC, ICS tie up to help Moroccan textile value chain

The International Trade Centre (ITC) has partnered with ICS, which...

Bangladesh garment manufacturers call for fair pricing

Apparel/Garments | On 21st Apr 2018

Bangladesh garment manufacturers call for fair pricing

Bangladesh garment manufacturers want a ‘commensurate adjustment’ by...

Pak ministry proposes extension to PM package for 2018-19

Textiles | On 21st Apr 2018

Pak ministry proposes extension to PM package for 2018-19

Pakistani textile ministry has reportedly proposed extending the...

Interviews View All

Victor Chao
Esmetex

‘In future, clothing boundary lines will become increasingly blurred.’

Amrit Sethia
SOIE

‘The intimatewear category in India is slowly becoming trend-sensitive.’

Akash Khetan
Narayan Tex Fab

I find it hard to find professionals in Surat

Rikesh Mistry

Jupiter Comtex Pvt Ltd, established in 1973, started its textile machinery ...

C Dhandayuthapani

MAG Solvics Private Limited was established in 1991 to design and develop...

Vikas Banduke

Softech Controls Private Limited (SCPL) is a part of the Cotmac Group, an...

Marcel Alberts
Eurofibers

Coating at a fibre level is a practice not usually seen in the...

Giorgio Mantovani
Corman S.p.A

Giorgio Mantovani, MD of Corman, with a presence in both Milano and New...

Johan Berlin
InvestKonsult Sweden AB

Investkonsult Sweden AB has been buying and selling second-hand textile...

Sanjukta Dutta
Sanjukta's Studio

<b>Sanjukta Dutta</b> creates unique garments by clubbing prints of...

Silvia Venturini Fendi
Fendi s.r.l

"Yes, my confidence and positive attitude are my strengths and should be...

Adriano Goldschmied
AG Jeans

The hype around 'designer jeans' was created by him. And the new wave of...

Press Release

Press Release

Letter to Editor

Letter to Editor

RSS Feed

RSS Feed

Submit your press release on


editorial@fibre2fashion.com

Letter To Editor






(Max. 8000 char.)

Search Companies





SEARCH

Leave your Comments


April 2018

Subscribe today and get the latest update on Textiles, Fashion, Apparel and so on.

news category


Related Categories:

Planning to Take the Leap towards
Sustainability?

Do you see sustainability as a route to business growth?

Yes No

Do you think the sustainability space has the needed tools and resources available for a business to lead change?

Yes No

Active Poll

Do you see sustainability as a route to business growth?

Yes
69.9%
No
12.6%
Skip
17.5%

Total Votes: 103

Do you think adopting a sustainable approach will be a profitable move for your business?

Yes No

Active Poll

Do you think the sustainability space has the needed tools and resources available for a business to lead change?

Yes
63.1%
No
29.1%
Skip
7.8%

Total Votes: 103

Do you want the world to know about your sustainability journey and your business’ environmental footprint?

Yes No

Active Poll

Do you think adopting a sustainable approach will be a profitable move for your business?

Yes
87.4%
No
8.7%
Skip
3.9%

Total Votes: 103

Thanks for your valuable feedback. Claim your free latest sustainability e-book.

Active Poll

Do you want the world to know about your sustainability journey and your business’ environmental footprint?

Yes
82.5%
No
7.8%
Skip
9.7%

Total Votes: 103


E-News Insight
Subscribe Today and Get the
Latest News Update in Your Mail Box.
Advanced Search