Global Apparel Market – An Overview | Watch NOW! | Ad
Home / Knowledge / News / Textiles / Oerlikon to show Sytec One BCF yarn plant at Domotex
Oerlikon to show Sytec One BCF yarn plant at Domotex
Feb '18
Oerlikon to show Sytec One BCF yarn plant at Domotex
Oerlikon Neumag by Oerlikon Manmade Fibers segment, a leader in manmade fibre filament spinning systems, texturing machines, BCF systems, staple fibre systems, and artificial turf systems, will show its Sytec One BCF yarn machine at Domotex Asia/Chinafloor, a global floor covering event, to be held from March 20 to 22, 2018, in hall W3, booth F03, in China.

If the requirements for the production of BCF yarns increase, for example, from recycled polyester or fine filaments, then this can also lead to higher breakage rates. Highly standardised production plants must then often strike compromises with regard to throughput, quality, or cost-efficiency. In such cases, the Sytec One offers a good solution instead of the mostly three-end technology plants for standard processes.

The BCF plant works with only one yarn (end) per position, making it ideal for demanding production processes. The reason: when a yarn break occurs only one yarn tears, all other yarns continue to run. This not only simplifies troubleshooting, it also reduces the re-threading time. In addition, less waste is produced. As a result, the productivity of the Sytec One is still over 98 per cent for ten breakages a day, while a plant with three-end technology only reaches around 92 per cent.

In addition, the absolutely straight yarn path of the Sytec One enables significantly higher process speeds of up to 15 per cent in spinning and texturing processes compared to multi-end technologies. Higher total titers of up to 6,000 dtex can also be produced without any problems. The gentle yarn guidance also ensures minimum friction on the individual filaments. This means less yarn breaks and a more stable process.

The engineers at Oerlikon Neumag have developed a new design for the spinning pack. This central component of every BCF machine significantly influences the yarn quality. The corresponding solution for the Sytec One optimises the polymer flow in the spin pack, thus reducing the polymer dwell time. This leads to shorter product and colour change times and increases the plant efficiency. In addition, the spinning packs were widened so that yarns with up to 500 filaments can now be produced.

In view of these advantages, the single-end Sytec One is recommended for processes with high breakage rates, fine filaments, frequent colour changes, or in general, when demanding processes take up an increasing share in the business. (GK)

Fibre2Fashion News Desk – India

Must ReadView All

Sri Lanka reduces VAT on imported fabric to 5%

Textiles | On 24th Sep 2018

Sri Lanka reduces VAT on imported fabric to 5%

Considering the requests made by the stakeholders in the fabric...

E-com firms in India to deduct 1% TCS under GST from Oct 1

Apparel/Garments | On 24th Sep 2018

E-com firms in India to deduct 1% TCS under GST from Oct 1

E-commerce companies in India will have to deduct 1 per cent tax...

Courtesy: Andritz

Textiles | On 24th Sep 2018

'Strength of economy, demographics drive nonwovens demand'

The strength of the economy and demographic trends are the main...

Interviews View All

Victor Chao, Esmetex

Victor Chao

‘In future, clothing boundary lines will become increasingly blurred.’

Nishank Patel, Shri Dinesh Mills Limited

Nishank Patel
Shri Dinesh Mills Limited

Broad range of fabrics will sell well this financial year

Janak Dhamanwala & Sunil Dhamanwala, Jansun

Janak Dhamanwala & Sunil Dhamanwala

Moving towards sustainability is also a social change

Anupam Arya,

Anupam Arya

<div>Jaipur-based Fabriclore Retailing Pvt. Ltd. is attempting to revive...

Manuele Baggini,

Manuele Baggini

Comec Italia Srl is a world leader in the production of printing machines. ...

Karan Behal,

Karan Behal

Karan Behal, founder and chief executive of top-selling brand...

Giorgio Mantovani, Corman S.p.A

Giorgio Mantovani
Corman S.p.A

Giorgio Mantovani, MD of Corman, with a presence in both Milano and New...

Pierre Wiertz, EDANA

Pierre Wiertz

EDANA, the international association serving the nonwovens and related...

Johan Berlin, Investkonsult Sweden AB

Johan Berlin
Investkonsult Sweden AB

Investkonsult Sweden AB are consultants in the nonwoven and absorbent...

Sidharth Sinha, Sidharth Sinha

Sidharth Sinha
Sidharth Sinha

<b>Sidharth Sinha</b> has contributed to the successful rebirth and...

Akta Adani, India Boulevard

Akta Adani
India Boulevard

India Boulevard is a San Francisco-based curated fashion marketplace that...

Rajesh Pratap Singh, Rajesh Pratap Singh

Rajesh Pratap Singh
Rajesh Pratap Singh

<div>Ace fashion designer <b>Rajesh Pratap Singh</b> has used Tencel to...

Press Release

Press Release

Letter to Editor

Letter to Editor

RSS Feed

RSS Feed

Submit your press release on

Letter To Editor

(Max. 8000 char.)

Search Companies


Leave your Comments

September 2018

Subscribe today and get the latest update on Textiles, Fashion, Apparel and so on.

news category

Related Categories:

Advanced Search